NOT AFFILIATED WITH FORD MOTOR COMPANY®
 


 
Follow Us


 

Shop

 


Cart

Interest







#S1MS-6529076/7
1964-1966 Mustang Side Scoop

ss-grill-2.jpg (23691 bytes)
#MR-ELN2-LSS
1964-1966 Mustang E2 Side Scoop w/Billet Grill sold separately

 

These side scoops are all made from hand laid fiberglass and are designed to last for years. They come in black gel coated fiberglass.  Fit and paint to match your Mustang. 1964-1966 Mustang can be maid functional with the side scoop duct kit below. Bolt on fiberglass parts should be fastened using Locktite and just make snug. Do not over tighten!

1964-1970 Mustang Fiberglass Side Scoops
Part # Description Price Qty Purchase


MR-ELN2-LSS

1964-1966 Mustang E2 Lower Side Scoop Set

$269.90/pr


TZ-2307

1964-1966 Mustang E2 Lower Side Scoop Grill Set- Fully Polished 
Works exclusively with our E2 side scoops PN MR-ELN2-LSS above

$89.99/set


MR-ELN2-USS

1964-1966 Mustang E2 Upper Side Scoop Set             
Fastbacks Only - Integrated studs for easy bolt on convenience!

$309.90/pr


FG-65LS1
 

1964-1966 Mustang Side Scoops S1MS-6529076/7

$69.99/pr


FS-ELN-US1

1967-1968 Mustang E Upper Scoop Set

$344.99/pr


FS-ELN-LS

1967-1968 Mustang E Lower Scoop Set

$344.99/pr


FG-67LS2

1967-1968 Mustang Lower Side Scoops Shelby Style Functional S7MS-6529076/7

$259.99/pr


MR-350

1967-1968 Mustang Upper Side Scoops Functional 
These are the original style upper side scoops used on the 1967-1968 Mustang G-350/500. The upper scoops are functional for cabin ventilation and are studded for ease of installation.
Pic2Pic3

$478.99/pr


FG-67LS1

1967-1968 Mustang Lower Side Scoops Non-Functional C8ZX-6529076/7

$139.99/pr


FG-MF69SSL

1969-1970 Mustang Shelby Style Side Scoop Set Convertible/Coupe

$209.99/pr


FG-MF69SSU

1969-1970 Mustang Side Scoops Set Shelby Style Fastback  

$209.99/pr

Fiberglass body parts do not fit the same as stamped steel parts. While they can be finished to show quality, fiberglass body parts are built closer to race car standards than show car standards. Although fiberglass parts are easy to work with, they can require substantial work to conform to the varying early unibody Mustangs. This means every car is slightly different. We have come to this conclusion after many years of installing and selling fiberglass body parts from many different manufacturers. Within 30 days of receipt, you must check fit before sanding or painting your new fiberglass pieces. If fiberglass parts have been sanded or painted they can no longer be sold as new for either race or show purposes. For this reason, the manufacturer will not warranty such parts and cannot be accepted for a return. Our policy for returning fiberglass parts is limited to the purchase price of the unit on Exchange. A 20% restocking fee is applicable for the monetary return of funds. In the event you feel the product is defective, our policy requires that you send the product back to us fully insured, heavily packaged to avoid damages and freight prepaid. A full investigation by Mustang Depot and the manufacturer will ensue. This includes fitting the item on the respective car, matching the part to the mold, and matching it with other items produced from the same mold. If it is determined that the product is not defective and is in reasonable constraints for finishing, the product will be returned at the customers expense. If it is deemed that the product is defective, a replacement will be sent at no cost, and .the return freight charges incurred by the customer will be refunded in the form of an in-store credit. All product that leaves Mustang Depot is inspected and confirmed to be in good condition, heavily packaged, and is insured for the value of the product. Noted on the package are clear neon stickers warning you to inspect the product in the presence of the carrier/driver. In the event damages occur, have the driver notate the damage. If the package was left at your door, you must notify the carrier immediately and file a damage claim. Do not return the product to Mustang Depot it is our policy to refuse returns without a Return Authorization number. Retain all the packaging so the carrier can inspect the product. In most cases, small repairs can be made at a reasonable cost. Get an estimate, and submit the claim. Full loss claims are scrutinized much heavier. Please note: For fiberglass hoods, removal of stock hood springs and use of a prop rod and hood pins are highly recommended. for trunks, removal of springs or tension rods is highly suggested. Fiberglass has about a 6-8 week cure time when it comes out of the molds. So it's important to remove the parts from it's packaging immediately. Do not place anything on top of the part during storage. The part will attempt to take the shape of whatever it's stored on top of as well. Especially in warmer climates. The best place to store the part is on the car in it's intended position. This kit is intended for off-road use only. The word Mustang and the word Shelby are used on our site for descriptive purposes only and are not meant to imply any affiliation with either Ford Motor Company or Shelby American.  Click here for our  Return Policy

Back to Fiberglass Parts

 

 

 

Featured Products

Universal


Auto Meter Gauges
for your Classic Mustang


Instructional DVD's
PAINTucation
by TV Host Kevin Tetz

1964-1973 Mustangs

Billet Hood Hinges
1965-1973 Mustang


Hoods

1964-1973 Mustang

Spoiler Trunk Lids

1964-1970 Mustang


E2 Body Kits

1965-1966 Mustang


Eleanor Body Kits
1967-1968 Mustang


65 Shelby Replica Body Kit
1965-1966 Mustang


67 Shelby Replica Body Kit
1967 Mustang


68 Shelby Replica Body Kit
1968 Mustang


Front Aprons/Valances

1964-1970 Mustang

Fender Flares

1964-1968 Mustang

Side Scoops

1964-1970 Mustang

Tail Light Panels
1964-1970 Mustang

Website and Contents Copyright © 1998-2014 Automotive Internet Retailers, LLC DBA Mustang Depot, a division of Depot Automotive Group® All rights reserved. Ford®, Ford Mustang®, Mustang GT®, SVT Cobra®, Mach 1 Mustang®, Boss Mustang®, Cobra R®, Bullitt Mustang®, SN95®, S197®, V6 Mustang®, Fox Body Mustang®, and 5.0 Mustang® are registered trademarks of Ford Motor Company®. All Ford® logo products herein are strictly licensed by Ford® to the respective supplier. Saleen® is a registered trademark of Saleen® Incorporated. Roush® is a registered trademark of Roush® Enterprises Inc. Shelby®, GT500®, GT500E®, GT350® and Eleanor® are registered trademarks of Carroll Hall Shelby Trust. All Shelby® logo products are licensed to the respective manufacturer or supplier by Carroll Shelby Licensing Inc, acting on behalf of Carroll Hall Shelby Trust. Mustang Depot has no affiliation with Ford Motor Company®, Roush® Enterprises, Shelby® American or Saleen®. Throughout our website and catalogs, these terms are used for identification purposes only. All products herein are reproduction parts unless specifically noted as "original" Ford® parts. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Information and prices are subject to change without notice. Photos are for graphical representation only and may not be the exact product you are ordering. Sales taxes are applicable to Nevada residents and in some cases where we drop ship from a warehouse within the same state as the customer. Thank you for choosing Mustang Depot!

 

Home   |   Terms and Conditions  |  Return Policy  |  SiteMap   |   Email List   |   Fax/Mail   |   Links   |   Linecard   |   Contact Us 

 

Follow Us

Mustang Depot 2510 E. Sunset Rd #3 Las Vegas, NV 89120